NO DISC
•No disc is inserted.
-Insert a disc.
•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.
-Remove the disc by following these steps:
1)Open the door.
2)Press c again for at least 3 seconds.
•Remote control operation is not possible.
-For some discs or playing modes, certain operations are not possible. This is not a malfunction.
REGIONAL CODE
VIOLATION
•Disc does not match regional code number.
- Load a disc that matches the regional code number.
•Protective circuit is activated at high temperature.
-The indicator will disappear when the temperature returns to within operation range.
-Leave the power OFF until the temperature decreases and then turn the power ON again.
LOADING ERROR
Specifications
Frequency Response
DVD: 5 – 22,000 Hz (± 1 dB) (48 kHz sampling) 5 – 44,000 Hz (± 1 dB) (96 kHz sampling)
CD: 5 – 20,000 Hz (± 1 dB)
Wow & Flutter (% WRMS) | Below measurable limits | |||||
Total Harmonic Distortion | 0.03% (at 1 kHz) | |||||
Dynamic Range | 90 dB (at 1 kHz) | |||||
Channel Separation | 85 dB (at 1 kHz) | |||||
Signal system | NTSC/PAL | |||||
Horizontal resolution | 500 lines or greater | |||||
Video output level | ||||||
Video S/N ratio | DVD: 60 dB | |||||
Audio S/N ratio | DVD: 95 dB | |||||
|
|
|
|
| CD: | 90 dB |
PICKUP |
|
|
| |||
Wave length | DVD: 665 nm | |||||
|
|
|
|
| CD: | 800 nm |
Laser power | CLASS II | |||||
REMOTE CONTROL |
|
| ||||
Battery Type |
| CR2025 battery | ||||
Width | 51 mm (2") | |||||
Height | 119 mm | |||||
Depth | 13 mm (33/64") | |||||
Weight | 50 g (1.75 oz) (battery excluded) | |||||
GENERAL |
|
|
| |||
Power Requirement | 14.4 V DC | |||||
|
|
|
|
| ||
Operating Temperature | +14°F to +140°F | |||||
|
|
|
|
| ||
Audio Output Level |
|
| ||||
Auxout: | 1.2V/10k ohms | |||||
850 mV | ||||||
CHASSIS SIZE |
|
|
| |||
Width | 178 mm (7") | |||||
Height | 50 mm (2") | |||||
Depth | 165 mm | |||||
Weight | 1.5kg (3 lbs. 5 oz) |
•Due to continuous product improvement, specifications and design are subject to change without notice.
EJECT ERROR
•Mechanism error.
1)Press c and eject the disc.
If the disc does not eject, press c again for at least 3 seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2)When the error indication remains after ejecting, press c again.
If the error indication still does not turn off after pressing c a few times, consult your Alpine dealer.
CAUTION
CLASS 1
LASER PRODUCT
(Bottom side of player)
(Bottom side of player)