Getting Started

 

Accessory List

 

Head unit

1

Power cable

1

Remote cable

1

Mounting sleeve

1

Bracket key

2

• Flush Head Screw (M5x8)

6

Screw (M5×8)

8

Remote control

1

Battery (CR2025)

1

Face plate

1

Mounting Position Seal

2

• Slot Securing Screw (M2 x 4)*

2

Owner’s Manual

1 set

 

* To customers who do not use an optional portable navigation:

 

If necessary, secure the slot panel with this screw.

 

Connectable to Remote Control Interface Box

You can operate this unit from the vehicle’s control unit when an Alpine Remote Control Interface Box (optional) is connected. For details, contact your Alpine dealer.

Location of Controls

DOCK indicator

Lights when a portable navigation device is inserted into the unit.

RESET switch

Be sure to press the RESET switch when using the unit for the first time, after installing the CD changer, after changing the car battery, etc.

Turn off the unit power, press RESET with a ballpoint pen or similar pointed object.

/ button

Press to adjust the volume.

Remote Sensor

Point the supplied remote control transmitter towards the remote sensor within a range of 2 meters.

SOURCE/ button

Turns the power on. Press and hold for at least 2 seconds to turn the power off.

Recalls the SOURCE selection screen.

10-EN

VISUAL /*button

Press to recall the VISUAL selection screen.

If VISUAL is set in “Setting the VISUAL Soft Button”

(page 36), momentarily press to recall the VISUAL selection screen, and if NAV. is set, momentarily press to recall the navigation screen.

Pressing and holding for at least 2 seconds will recall the setting which is set in “Setting the VISUAL Button on the Unit” (page 37).

If “AUDIO SETUP” is set, the AUDIO SETUP screen will be recalled.

If “SAT” is set, the weather channel or traffic channel will be recalled (when the XM or SIRIUS Receiver Box is connected).

If “TEL” is set, the TEL Bluetooth screen will be recalled (when the optional Bluetooth Box is connected).

button

Recalls the EJECT/TILT screen.

POWER indicator

Blinks when an operation is performed. However, turns off when Beep is set to OFF.

About the button descriptions used in this Owner’s Manual

The buttons found on the face of the unit are expressed in bold (e.g. SOURCE/). The buttons found on the touch-screen display are shown in bold within brackets, [ ] (e.g. [SOURCE]).

This Owner’s Manual explains mainly the function of soft buttons, when a soft button and a unit button have the same function.

Turning Power On or Off

Some of this unit’s functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake, before attempting these operations.

1 Press SOURCE/ to turn on the unit.

The unit can be turned on by pressing any button.

2 Press and hold SOURCE/ for at least 2 seconds to turn off the unit.

Some operation of the unit cannot be performed while the vehicle is in motion. In this case, be sure to first stop your vehicle and apply the parking brake, then perform the operation.

The IVA-W203 is a precision device. With gentle handling, its unique capabilities can be enjoyed for a long time.

In low ambient temperature conditions, the display may be dim for a short period of time immediately after the power is turned on. Once the LCD has warmed up, the display returns to normal.

Page 12
Image 12
Alpine IVA-W203 owner manual Getting Started, Accessory List, Location of Controls, Turning Power On or Off, 10-EN