RADIO Setup

 

GENERAL Setup

 

 

 

Digital SEEK Setting (HD Radio mode only)

After carrying out the steps 1 to 3 of “To display the General mode screen” explained on page 33, perform the operation described below.

1 Touch [SETUP] on the main source screen.

The SETUP selection screen is displayed.

2 Touch [SOURCE].

The SOURCE SETUP screen appears.

3 Touch [ ] of RADIO SETUP.

The RADIO SETUP screen appears.

4 Touch [ON] or [OFF] of DIGITAL SEEK.

ON: SEEK UP/DOWN is used only for the digital radio station.

OFF: SEEK UP/DOWN is used for DIGITAL and ANALOG radio stations. However, the strong signals have priority during SEEK.

General Setup Operation

To display the General mode screen:

To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.

1Bring your vehicle to a complete stop at a safe location. Engage the parking brake.

2Keep pushing the foot brake and release the parking brake once then engage it again.

3When the parking brake is engaged for the second time, release the foot brake.

For automatic transmission vehicles, place the transmission lever in the Park position.

Now, the locking system for the General mode operation has been released. Engaging the parking brake can reactivate the General mode, as long as the car’s ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of “To display the General mode screen.”

Each time the ignition is turned OFF, perform the procedure of “To display the General mode screen.”

The following steps 1 to 4 are common operations to each “Setting item” of GENERAL Setup. Refer to each section for details.

1 Touch [SETUP] on the main source screen.

The SETUP selection screen is displayed.

2 Touch [GENERAL].

The GENERAL SETUP screen appears.

3 Touch [OFF], [ON] or [ ], [ ], etc., of the desired item to change its setting.

Setting items:

CLOCK / CLOCK ADJUST / DAYLIGHT SAVING TIME / DEMONSTRATION / BEEP / AUTO SCROLL /

LED DIMMER LEVEL

4 Touch [RETURN] to return to the previous screen.

Touch and hold [RETURN] for at least 2 seconds to return to the main source screen that was displayed before the setup operation was started.

Immediately after changing the settings of General Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed.

33-EN

Page 35
Image 35
Alpine IVA-W203 Radio Setup General Setup, Digital Seek Setting HD Radio mode only, General Setup Operation, 33-EN