OPERATING INSTRUCTIONS
core temperature probe mode
As an alternative to timer operation, the Core Temperature Probe mode can be used in conjunction with any program mode to cook by sensing internal product temperature using the included probe. For a more accurate internal temperature, an optional, specialized, Combitherm product probe senses temperature from four strategic points and displays a temperature average.
PRESS ON button to power oven on.
Attach removable probe before activating core temperature function, and insert into product.
The probe must be inserted so that the tip is positioned in the center of the food mass. For liquid or
PRESS THE required cooking MODE icon. The last set values or oven control default setting for temperature and time will appear in the display.
PRESS THE START icon TO cook AT THE displayed SETTINGS, or
touch the displayed temperature.
The cooking temperature will appear at the top of the temperature selection window. Type in desired temperature or use up and down arrows to adjust temperature. When finished, touch the green check mark
key to confirm change.
touch the probe icon.
The previously set core temperature or default setting will appear highlighted within the oven display. Touch the displayed core temperature. The internal product core temperature will appear at the top of the temperature selection window. Type in desired internal product core temperature or use up and down arrows to adjust temperature. When finished, touch the green check mark
key to confirm change.
PRESS THE green START arrow icon TO BEGIN COOKING.
•The actual internal product temperature will appear
next to the icon during operation. To change the set value for core temperature, press the temperature next
to the icon and make changes as required.
press for steam Injection at Any Time During Cooking. Steam will inject into the cavity as long as the icon is touched.
When the
•To stop the buzzer, press the red stop icon or open the oven door.
To stop cooking program at any time, press red Stop icon.
note: calibrate the CombiTouch oven to use a
With CombiTouch oven on, fill a pitcher of ice
water and place inside the combi oven.
Remove the original hanging probe from inside the oven.
Snap
Check the temperature by selecting the “probe” button on the cooking mode menu.
Once the temperature reading is 35 degrees, press the back arrow button in the lower left hand corner of the screen to return to the home screen.
Press the
Adjust the temperature control back 3 degrees using the minus key, then press the back arrow to return to the home screen.
The control has now been calibrated to use the
17