Alto-Shaam rotisserie electric with ventless hood manual Rotisserie, Bulb Replacement Instructions

Models: ar-7evh rotisserie electric with ventless hood

1 48
Download 48 pages 41.77 Kb
Page 33
Image 33
ROTISSERIE, BULB REPLACEMENT INSTRUCTIONS

S E R V I C E

ROTISSERIE, BULB REPLACEMENT INSTRUCTIONS

ATo Replace Bulbs:

A.Remove four screws holding glass light cover (CV-26607) and gasket (GS-26609) in place, taking care to not let the glass cover (GL-26608) fall into the oven.

B.Pull bulb out.

C.Push replacement bulb (LP-34213) in place.

D.Re-install glass cover and gasket, securing with four screws removed in step one.

B & C

D

C A U T I O N

DO NOT HANDLE NEW BULB WITH BARE HANDS. WHITE COTTON GLOVES SHOULD BE WORN WHEN REPLACING BULBS.

C A U T I O N

The performance of this unit has been optimized using the factory provided bulbs. These bulbs should be replaced with an exact replacement or with a factory recommended replacement. These bulbs have been treated to resist breakage and must be replaced with similarly treated bulbs in order to maintain compliance with NSF standards. DO NOT over-tighten bulbs in their receptacles as this can cause damage to the bulb filament.

Part numbers and drawings are subject to change without notice.

MN-28907 (Rev 0) • AR-7EVH Electric Rotisserie with Ventless Hood Operation & Care Manual • 31

Page 33
Image 33
Alto-Shaam rotisserie electric with ventless hood Rotisserie, Bulb Replacement Instructions, C A U T I O N, S E R V I C E