INSTALLATION
PARTS, TOOLS, MATERIALS
YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THE INSTALLATION:
Carton or other heavy material for covering the counter top.
Clear tape |
| Stud finder or thin nail. |
(for taping the templates to the wall) |
|
|
|
|
|
Keyhole saw (for the power cord hole)
Saber saw (for cutting vent holes for roof or wall venting)
Electric drill
Phillips screwdriver (for the screws)
| 3/8" and 3/4" wood drill bits | |
| ||
| 1/2" and 3/16" | |
Pencil | ||
drill bits | ||
| ||
|
|
Flat blade screwdriver (for the toggle bolts)
Plumb line
Measuring tape (metal preferred)
Duct Tape
Small side cutters or tin snips
Caulking gun
•If you have brick or masonry walls, you will need special hardware and tools.
•The ductwork you need for the installation is not included. All wall and roof caps must have a
10
