INSTALLATION
PARTS, TOOLS, MATERIALS
THE FOLLOWING PARTS ARE SUPPLIED WITH THE OVEN:
NOTE: Depending on your ventilation requirements, you may not use all of these parts.
Backdraft damper / duct connector
(for
One power cord clamp and
One dark-colored mounting screw
(to hold the power cord) Actual Size
Two self - tapping screws - Actual Size (for attaching the damper duct connector)
One lock pin and one washer-Not Actual size
One power cord clamp bushing - Actual Size |
(for the cord hole in a metal upper cabinet) |
Four 1/4" x 2" lag screws - Actual Size
(for wall stud holes)
Four 1/4" x 3" toggle bolts - Actual Size |
(for drywall holes) |
Two 1/4" x 2" or 3" bolts - Actual Size
(for securing to the upper cabinet)
Four spring toggle heads - Actual Size
(for the toggle bolts)
Two washers - Actual Size
(for the two upper cabinet bolts)
NOTE: You need to install at least 2 lag screws into one 2" x 4" stud and four anchor bolts into the wall. The mounting area must meet the 150 lbs. weight requirement.
9
