INSTALLATION
STEP 6: ATTACH THE OVEN TO THE WALL
wCAUTION
To avoid risk of personal injury or property damage, you will need two people to install this microwave oven.
1.Carefully lift microwave oven and hang it on support tabs (See Figure 26) at the bottom of the mounting plate. Reaching through upper cabinet, thread power supply cord through the power supply cord hole in the bottom of the upper cabinet. See Figure 30.
power cord
power cord hole
2.Rotate the microwave oven upward so the top of oven is against the bottom of the upper cabinet or cabinet frame.
Figure 30
3. Drop the lock pin and washer assembly into hole "N" (left side hole) and push the pin down as far as it will go. See
Figure 31. | lock pin | |
washer | ||
|
Figure 31
4. Place washers over two 1/4"x3" bolts. Then insert a bolt
down through each hole in the upper cabinet bottom. Tighten the bolts until the gap between the upper cabinet and microwave oven is closed. See Figure 32.
5. Remove lock pin and washer.
If
Figure 32
20
