Installation
6. Align bottom of handle with lower door tab. Press upper handle end to door surface and firmly grasp lower end of handle. Gently slide handle upward until bottom of handle settles on door surface, then reverse direction, sliding downward to almost engaging tab with clip.
7. Grasp the handle firmly and slide down until it clicks. The audible click indicates fastening clips are securely interlocked.
To Remove:
1. Flex the handle away from the door
panel. Simultaneously place door handle removal card underneath the base of the lower handle. Insert the card to the line or until it stops.
2. Grasp the lower part of the handle firmly and lift to remove.
Handle Extensions (select models)
To Install:
1.Align and clip handle extension into position on the handle. Press the extension over the door retainers.
To Remove:
1.Slide the extension down and unclip from door retainer.
Full-Length Aluminum Handles
To Install:
1. Release top door trim by removing Phillips screws from top of fresh food door and retain screws for later use.
2. Align notches on back of handle with |
| |
retaining clips on doors. Insert |
| |
clips into notches and slide |
| |
handle down until it contacts | Door Clip | |
bottom trim. | ||
|
3. Replace top door trim and Phillips screws.
4. Repeat instructions
WARNING
To avoid possible injury and damage to property, tape decorative panels (select models) securely into place before removing door handles.
To Remove:
1. Release top door trim by removing Phillips screws from top of fresh food door and retain screws for later use.
2. Grasp handle firmly with both hands. Slide handle upward approximately 3⁄4" to release.
3. Repeat instructions
To Reinstall:
1. Repeat in reverse order.
6
