Chapter 2. Installing the Battery Backup Unit
bPress down gently on the battery module until the bottom clip snaps into place in the lower hole.
3Insert the battery power connector into the power receptacle on the BBU.
Note: The battery will drain if it is plugged in and there is no power to the unit. If the system will not be used right away, wait to do this step until the system is ready for use.
Figure 29. Battery power connector inserted in power receptacle
The controller is now ready to install in your system.
Figure 23 shows the BBU fully installed on 3ware controllers.
303ware 9550SX Serial ATA RAID Controller Quick Install Guide
