AMCC 9550SX-8LP manual Removing the battery module

Replacing the Battery

4While pressing down on the top of the battery module, lift out the bottom of the battery module slightly.

5Once the bottom of the module is free, slide the module up to release the clips on the top.

a) Push the battery module down gently.

b) Lift out the bottom of the battery module to release the clip on the bottom edge.

c) Lift up to remove

the clips on the top edge.

Bottom clip

Figure 31. Removing the battery module

6Disconnect the battery power cable from the BBU.

To do so, press down on the lever-like clip on the battery power connector and slide it out of the slot.

(If desired, you can remove the BBU control module to facilitate disconnecting the power cable.)

www.3ware.com 33