GENERAL FUNCTIONS AND CONTROLS (Cont.)
|
|
|
|
|
|
| 61 |
44 |
|
|
|
|
| 0LOCK | 60 |
|
|
|
|
|
| ||
45 | EFFECT | CUE | ELAPSED | TOTAL REMAIN |
| 59 | |
46 | SINGLE |
| M: |
|
| 58 | |
|
|
|
| ||||
47 | LOOP |
|
|
| 57 | ||
| RELOOP |
|
|
|
| ||
48 | T | S | F | 160. |
| ||
|
| 88 | 00 | 00 00 |
| ||
Figure 6
49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 |
D. LCD DISPLAY PANEL (FIGURE 6)
44.PLAY INDICATOR - This indicator will glow when the unit is in play mode.
45.EFFECT INDICATOR - This indicator glows when any of the nine
46.SINGLE INDICATOR - This indicates that the CD drive is in single play mode, the track will play once and return to CUE mode. If the single indi- cator is not on the unit is in continuous mode In continuous mode the drive will play all the remain- ing tracks on the disc. Once the remaining tracks have ended the unit will return to cue mode
47.LOOP - This icon will flash when you are in loop mode. This icon will glow when a loop has been created but is not actively playing.
48.RELOOP INDICATOR - Appears when LOOP is engaged or ready to be engaged.
49.PAUSE INDICATOR - This indicator will glow when the drive is in pause mode.
50.TRACK INDICATOR - This indicator describes which track is currently cued or is playing.
51.CUE INDICATOR - This indicator will glow when the unit is in CUE or mode and will flash every time a new CUE POINT is set.
52, 53, 54. TIME METERS - These indicators will detail the current Minutes, Seconds, and Frames. The meter will display either the elapse, total, or remaining time of a track or the entire disc. The display time will depend on the selected time func- tion. The selected time function will be displayed above the TIME METER as TOTAL REMAIN (58),
REMAIN (58) OR ELAPSE (59).
55.MEMORY BUCKET INDICATOR - This indi- cator serves two functions. The red bucket out- line details the cue memory status, a full bucket outline indicates the cue memory is full. The five bars in the memory bucket detail the
56.PITCH METER - This meter will display either the pitch percentage applied by the PITCH SLID- ER (33).
57.TIME BAR INDICATOR - This bar gives a visual approximation of a track's or disc's time This bar will begin to flash when a track is end- ing. The flashing bar is great reminder, that time is running out to get that next track ready to go.
58.LOCK INDICATOR - This indicates the unit control are in lock mode, see page 23.
59.P.S.P. INDICATOR - This indicates which, if any, of the effect presets is in use.
60.TOTAL/REMAIN INDICATOR - When TOTAL is indicated in the LCD DISPLAY (19) the TIME DESCRIBED (52, 53, & 54) in the LCD (19) will define the total disc remaining time. When REMAIN is indicated in the LCD DISPLAY (19) the TIME DESCRIBED (52, 53, & 54) in the LCD will define the current track's remaining time.
61.ELAPSE INDICATOR - When this indicator is on it will define the time displayed in the TIME METER (52, 53, & 54) as the current track’s elapse time.
©American Audio® - www.americandj.com -
