American Audio Pro-Scratch 2 manual Parameters

BUILT-IN EFFECTS

	OFF
POWER	ON
1	2 3 4 5 6	7 8 9 0	PROGRAM	NONSTOP		AUTO
PARAMETER TIME		CUE	ELAPSED	TOTAL REMAIN		CUE BPM	KEY
						BEAT SYNC.	LOCK
SINGLE
	LOOP						BPM
RELOOP		T	M	S	F		PITCH

PARAMETER RATIO
	SCRATCH	FILTER	HOLD	ECHO	TRANS
	SKID	PHASE		FLANGER	PAN

BOP

FX

MIX

ENTER

EJECT

FX SELECT SGL/CTN

TIME REV.PLAY

TEMPO ON/OFF

LOCK 4%/8%/16%

SAMPLE PITCH

TRANS/PAN EFFECT: The TRANS effect simulates a real-time mixer transformer effect. When the "Transformer" effect is activated the TRANS/PAN BUTTON (21) will glow green, when the "Pan" effect is selected the button will glow red. The PAN effect allows you to pan the output from the left channel to the right channel.

TRANS EFFECT: The TRANS Effect has two adjustable parameters, Parameter Time and Parameter Ratio. The PT will adjust the Trans Speed and The PR will adjust the Trans Audio Length. The lower the PT value the faster the TRANS effect (PT 0500 = 1/2 second, PT 1000 = 1 second).

PAN EFFECT: The PAN effect uses the PT value to pan left to Right. PT 0500 is the default setting which is center pan. The Pan Value ranges from 10ms to ten seconds.

Figure 54

		OFF
POWER		ON
1	2	3	4	5	6	7	8	9	0

PARAMETERS:	PARAMETER TIME	RELOOP	T
		CUE

SINGLE

LOOP

PARAMETER RATIO

PROGRAM	NONSTOP	AUTO
		CUE BPM
ELAPSED	TOTAL REMAIN	BEAT SYNC.

M S F

KEY

LOCK

EJECT

BPM

PITCH

All the effects have adjustable parameters. The parameters change the way the effect will react. To enter the parameters menus for any of the effects, press or turn either of the two PARAMETER KNOBS (1 OR 3) as in figure 55. When the parameter mode is selected the time display in the LCD (19) will change to indi- cate the parameter your are adjusting. All effects except the pan effect have two adjustable parameters. Parameter Time (1) and parameter ratio (3). Use these knobs to customize the effects to your liking.

SCRATCH	FILTER	HOLD	ECHO	TRANS
SKID	PHASE		FLANGER	PAN

BOP

FX

MIX

ENTER

FX SELECT SGL/CTN

TIME REV.PLAY

TEMPO ON/OFF

LOCK 4%/8%/16%

SAMPLE PITCH

	OFF
POWER	ON
1	2 3 4 5 6	7 8 9 0	PROGRAM	NONSTOP		AUTO
PARAMETER TIME		CUE	ELAPSED	TOTAL REMAIN		CUE BPM	KEY
						BEAT SYNC.	LOCK
SINGLE
	LOOP						BPM
RELOOP		T	M	S	F		PITCH

PARAMETER RATIO
	SCRATCH	FILTER	HOLD	ECHO	TRANS
	SKID	PHASE		FLANGER	PAN

BOP

FX

MIX

ENTER

EJECT

FX SELECT SGL/CTN

TIME REV.PLAY

TEMPO ON/OFF

LOCK 4%/8%/16%

SAMPLE PITCH

Figure 55

HOLD BUTTON: Use the HOLD BUTTON (2) to lock your customized param- eters. If the hold button is not activated any changes to your parameters will be momentary. To activate the hold function press the HOLD BUTTON (2) as in figure 56. When the hold function becomes activated, the hold button will begin to glow blue.

Figure 56

©American Audio® - www.americandj.com - Pro-Scratch 2™ Instruction Manual Page 29