56
c. Tilting Piston Replacement
1) Disconnect compressed air supply from the dryer.
2) Tilt, then level the dryer to exhaust as much air as possible.
3) Disengage “EMERGENCY STOP” (E-Stop)...
Discontinue electrical power to the dryer.
4) Remove the six (6) screws holding the piston cover plate.
5) Label the air lines as an aid when reconnecting.
6) Loosen the 3/8” compression fittings...
Remove the air lines.
7) Remove the 3/8” straight connector.
8) Remove the 3/8” elbow.