Keyboard Installation and Operation
11.Numeric keypad - keys ranging from 0 to 9 that enable the user to select specific cameras, monitors, presets, sequences, etc.
12.Monitor key - selects the monitor whose number was entered on the numeric keypad.
13.Camera key - selects the camera whose number was entered on the numeric keypad.
14.Alarm acknowledge key - acknowledges/clears an alarm displayed on the currently active monitor.
15.Focus Near/Focus Far Key - adjusts the lens focus for the selected camera.
16.Open/Close Iris Key - opens or closes the lens iris for the selected camera.
17.Zoom In/Zoom Out Key - zoom in or zoom out with the selected camera.
18.Search key - places a DVR into search mode.
19.Telemetry enable/disable key - allows telemetry control (note, when the joystick is moved, the keyboard automatically enters telemetry mode).
20.Reverse play key - places a VCR/DVR into reverse play mode.
21.Pause key - places a VCR/DVR into pause.
22.Direct Control key - calls a VCR/DVR to control.
23.Rewind key - places a VCR/DVR into rewind.
24.Fast forward key - places a VCR/DVR into fast forward.
25.Joystick
ADCC0200
ADCC0300
26.Enter key - used when in program mode.
27.Record key - places a VCR/DVR into record mode.
28.Stop key - stops playback of a VCR/DVR.
29.Start key - starts playback of a VCR/DVR.
30.Auxiliary 1 key - toggles auxiliary 1 between ON state and OFF state.
31.Auxiliary 3 key - toggles auxiliary 3 between ON state and OFF state.
32.Autopan key - starts autopan function for the selected camera (if function is available).
5
