American Power Conversion BI800T, BI800F user manual Battery

On Mains

On Battery

Fault

INV

25%

50%

75%

100%

Overload

Mode

Disable

Buzzer

Description

(green)

(yellow)

(red)

(green)

(green)

(green)

(green)

(red)

(red)

FAULT-

On

Flashing

Flashing

Off

Off

Off

Off

Off

Off

Chirps every 2.5

The unit is in FAULT mode,

seconds; sound is

contact APC Technical

mutable through the

Support.

front panel TEST/

MUTE push button.

BATTERY

On

Off

Flashing

Off

Off

Off

Off

Off

Off

Chirp every 2 seconds

The unit is ON-LINE mode;

DISCONNECTED

battery is disconnected.

OVER TEMP ON-

Off

Off

4 flashes

Off

Off

Off

Off

Off

Off

Continuously On

The unit is in FAULT mode

BATTERY

every

2

due to over- temperature

second

condition.

OVER TEMP ON-

On

Off

4 flashes

Off

Off

Off

Off

Off

Off

Off

The unit is in ON-LINE mode,

LINE

every

2

but the charger is switched off

second

due to over- temperature.

ON LINE

On

Off

Off

On

Off

Off

Off

Off

Off

Off

The unit is in ON-LINE, but

the inverter is disabled and

the unit will not go ON

BATTERY during a power

failure.

ON LINE SELF TEST

Flashing

Off

Off

On

Off

Off

Off

Off

Off

Off

The unit is in ON-LINE Self-

Test mode, but the inverter is

disabled and the unit will not

go ON-BATTERY during a

power failure.

ON BATTERY SELF

Flashing

On

Off

On

On

Off

Off

Off

Off

Off

The unit is ON-BATTERY-

TEST

Self-Test but the inverter is

disabled and the unit will not

go ON-BATTERY during a

power failure.

ON BATTERY Low

Off

On

Off

Off

On

Off

Off

Off

Off

Constant Beeping,

Load is less than 25%.

Battery Warning

Can be muted through

fron panel TEST/

MUTE push button.

ON BATTERY Low

Off

On

Off

Off

On

On

Off

Off

Off

Constant Beeping,

Load is between 25% and

Battery Warning

Can be muted through

50%.

front panel TEST/

MUTE push button.

ON BATTERY Low

Off

On

Off

Off

On

On

On

Off

Off

Constant Beeping,

Load is between 50% and

Battery Warning

Can be muted through

75%.

front panel TEST/

MUTE push button.

ON BATTERY Low

Off

On

Off

Off

On

On

On

On

Off

Constant Beeping,

Load is between 75% and

Battery Warning

Can be muted through

Overload limit.

front panel TEST/

MUTE push button.

ON BATTERY Low

Off

On

Off

Off

On

On

On

On

On

Constant Beeping,

Load is more than overlaod

Battery Warning

Can be muted through

limit.

front panel push

TEST/MUTE button.

NOTE: In the case of a sustained overload, the Inverter will be turned off automatically after one minute, and will wait in the fault state for a minute. After that, it will restart again. If the overload still persists, the Inverter will be turned off again after one minute, and will wait in fault state for one minute and restart again. In the same way, it will try for three restarts. If the overload still persists, it will stay in fault state permanently until the unit is restarted with push button. If the time interval between two consecutive overloads is more than 5 mins, then the latest overload is considered as a fresh overload and three restart cycle will begin again.

Page 11