American Power Conversion MX28B400 Address, Switzer Av, Dallas, TX, Alarm Item, Batt LV Alm Onm

Parameter Locations, Descriptions, and Default Values

PARAMETER NAME/	DESCRIPTION	DISPLAY SCREENS /
[MENU LOCATION]		DEFAULT SETTINGS
Address 1	Power plant address or identification -	Address 1	m+
Security Level {1}	first line.	APC DCNS, Inc.
[SYSTEM/SETUP]
Address 2	Power plant address or identification -	Address 2	m+
Security Level {1}	second line.	11035 Switzer Av
[SYSTEM/SETUP]
Address 3	Power plant address or identification -	Address 3	m+
Security Level {1}	third line.	Dallas, TX.
[SYSTEM/SETUP]
Alarms Item 1	Display of up to 16 active alarms (a	Alarm Item 1	+
{Status Only}	typical alarm screen is shown).	Batt LV Alm Onm
[ALARMS]	•	•
•	•
		•
•	•
		•
•	Display of up to 16 active alarms (a
Alarms Item 16	typical alarm screen is shown).	Alarm Item 16	+
[ALARMS]		No Alarms
Battery Current	Battery current measured by the system	Batt Current	+
{Status Only}	controller at the battery current shunt.	-15.0 A
[STATUS]
Battery Discharge Alarm	The output relay energized if the battery	Batt Disc Alm m+
Security Level {1}	discharge current exceeds the	Minor
[BATT/SET-ALM]	programmed battery discharge threshold.
Battery Discharge Threshold	An alarm is generated if the battery	Batt Disc Thr m+
Security Level {1}	discharge current exceeds this value.	10 A
[BATT/SET-ALM]
Battery Float Voltage	One of three parameters that control the	Batt Float	m+
Security Level {1}	output voltage. Set the Float Voltage at	27.00 V
[BATT/PARAM]	25°C battery temperature per the battery
	manufacturers recommendations.
Battery High Temperature	The output relay energized if the battery	Batt HT Alm	m+
Alarm	temperature exceeds the Battery High	Minor
Security Level {1}	Temperature threshold.
[BATT/SET-ALM]
Battery High Temperature	Battery Temperature is temperature	Batt HT Thr	m+
Threshold	measured at the battery probe. An alarm	70.0 C
Security Level {1}	is generated if the battery temperature
[BATT/SET-ALM]	exceeds this value.
Battery High Voltage Alarm	The output relay energized if the dc	Batt HV Alm	m+
Security Level {1}	output voltage rises above the battery	Minor
[BATT/SET-ALM]	high voltage threshold.
Battery High Voltage Threshold	An alarm will be reported if temperature	Batt HV Thr	m+
Security Level {1}	is lower than the temperature entered.	28.00 V
[BATT/SET-ALM]	An alarm is generated if the dc output
	voltage rises above this value.

MX28B400 +24 VDC User’s Manual Page 25