AMX ALD-H48 instruction manual

Getting Started

You can also make any additional edits to the ALD-H48 project or elect to send the file to the

NetLinx Master as is.

There is a "simple" version of the ALD-H48 files. These files are intended for demonstration purposes only.

Step 4: Transferring The ALD-H48 Project to A NetLinx Master

NetLinx Studio can transfer the ALD-H48 project file to any connected NetLinx Master with firmware version 3.XX or higher.

1.Select Tools > File Transfer to open the File Transfer dialog.

2.If the Workspace file is not already listed in the window click Quick Load to open the corresponding dialog.

3.In the drop down list select the ALD-H48 Workspace.

4.Click Select All.

5.Click OK.

6.Make sure there is a check in the box next to the ALD-H48 workspace within the File Transfer dialog and click Send.

4 ALD-H48 Lighting Controller