Updating The ALD-H48 Firmware

Updating The ALD-H48 Firmware

In the event you need to update the firmware on the ALD-H48:

Via 232

1.Connect at 115200/8/n/1/Hardware

2.At the "L232>" prompt

Send the "UPDATEINOS" command.

3.At the "OSM>" prompt

a.Send the "OSLOAD" command.

b.Transfer the "osif3.asc.bin" file via Y-Modem

4.After receiving "**********"

Transfer the "hw_oper3.hwi.bin" file via Y-Modem

5.At the OSM prompt

Send the "OSPGM" command

6.Processor will then reboot and you will see modem init string "AT&F1E0F1Q1S0=1M0&C0&D0"

Via Ethernet:

1.Connect via telnet

2.At the "LNET>" prompt

Send the "UPDATEINOS" command.

3.Open FTP connection (username: "lutron" password: "amx01")

4.Send FTP command "ALLO [file size of osif3.asc.bin]"

5.Send FTP command "STOR osif3.dat"

Transfer "osif3.asc.bin" as "osif3.dat"

6.Send FTP command "ALLO [file size of hw_oper3.hwi.bin]"

7.Send FTP command "STOR hw_oper3.hwi"

Transfer "hw_oper3.hwi.bin" as "hw_oper3.hwi"

8.Close FTP connection

9.At "LNET:OSM>" prompt in telnet

Send "OSPGM" command

10.Processor will reboot (telnet connection will be dropped).

ALD-H48 Lighting Controller

37

 

 

 

 

Page 43
Image 43
AMX instruction manual Updating The ALD-H48 Firmware, Via Ethernet