Using The Touch Panel Pages
16 ALD-H48 Lighting Controller
Scenes Page
Accessing the Scenes page allows you to create and edit lighting scenes. A lighting scene is a
collection of dimmers changing to specific intensity percentages (0-100%), fading in or out (up to 1
minute) and having a delay time (up to 2 hours). All of the Scene parameters come together for
specific lighting needs, i.e., a slideshow presentation.
Bus Toggle - Push the Up and Down arrows to select the Bus of dimmers.
Dimmer Addresses - Push the dimmer address to be set into the scene.
Intensity Level - Based on a percentage of 0 - 100%, raise or lower the intensity for the
selected dimmer.
Fade Time - Up to 1 minute, set the fade in or out for the selected dimmer.
Delay Time - Set the amount of time, up to 2 hours, the dimmer delays before initiating
its intensity and fade sequence. If the delay time is set lower than 0 minutes, the time
defaults to 120 minutes.
Scene Preset Buttons - Scene selection for the purpose of editing. Push any scene button
to open and edit. The sample touch panel page provides you with 4 scenes.
FIG. 12 Scenes Page
Bus Toggle
Dimmer Addresses
Delay Time
Fade TimeIntensity Level
Delete Scene Button
Scene Preset Buttons
Back Button