AMX ALD-H48 instruction manual LIGHTSTATE-1,ON

Advanced Programming

Command Feedback (Cont.)

String	Description
LIGHTSTATE-<index>,	Feedback for the Dimmer state.
<state>	<index>: 1..n = index of the Dimmer
	<state>: ON, OFF
	Example: (assuming that there is a Dimmer stored at index 1)
	LIGHTSTATE-1,ON
PROPERTY-<key>,<value>	Feedback for the property query.
	<key>: IP_Address
	Password
	<value>: actual key value
	Example:
	PROPERTY-Password,jetski
SERIALNUMBER-<number>,<bus>	This reply is received while the H48 is in programming mode and
	a dimmer has been triple-tapped. This reply will notify you of the
	dimmer's serial number that has been triple-tapped.
	<number>: serial number of the triple-tapped dimmer
	<bus>: 1..6 = bus number dimmer is on
	0 = invalid/unrecognized bus
	Example:
	SERIALNUMBER-12466768689,1
SETADDRESS-<state>,	Reply received after a successful dimmer address assignment.
<addr>,	<state>: SUCCESS
<serialNum>	<addr>: new dimmer address
	<serialNum>: serial number of the dimmer
	Example:
	SETADDRESS-SUCCESS,[1:4:1:1:1],12466768689
TIME-<time>	Feedback for the current time. Military time format. This reply is
	received asynchronously approx. every 1 minute.
	<time>: string
	Example:
	TIME-13:24:10
VERSION-<version>	Feedback for the module version.
	<version> string
	Example:
	VERSION-1.0.0

32 ALD-H48 Lighting Controller