AMX NXD-700Vi manual PHN Transferred, Phn-Answer, ?Phn, Phn-Decline, Phn-Dtmf

Programming

SIP Commands (Cont.)

^PHN-

TRANSFERRED

Indicates a call has been transferred.

Syntax:

"'^PHN-TRANSFERRED'"

Example:

SEND_COMMAND Panel,"'^PHN-TRANSFERRED’"

The following table lists and describes SIP commands that are sent to the touch panel to manage calls.

SIP Commands

^PHN-ANSWER	Syntax:
Answers the call.	"'^PHN-ANSWER, <connection id>'"
	Variable:
	connection id = The identifying number of the connection
	Example:
	SEND_COMMAND Panel,"'^PHN-ANSWER, 1'"
^PHN-	Enables (1) or disables (0) the auto-answer feature on the phone.
AUTOANSWER	Syntax:
Enables or
	"’^PHN-AUTOANSWER, <state>’"
disables the
	Variable:
auto-answer
	state = 0 (Disable) or 1 (Enable)
feature of the
phone.	Example:
	SEND_COMMAND Panel,"'^PHN-AUTOANSWER, 1'"
	Enables the auto-answer feature.
?PHN-	The panel responds with the ^PHN-AUTOANSWER, <state> message.
AUTOANSWER	Syntax:
Queries the state
	"’?PHN-AUTOANSWER’"
of the
	Example:
auto-answer
feature.	SEND_COMMAND Panel,"'?PHN-AUTOANSWER'"
^PHN-CALL	Syntax:
Calls the provided	"’^PHN-CALL, <number>’"
number.	Variable:
	number = The provided phone number
	Example:
	SEND_COMMAND Panel,"'^PHN-CALL, 2125551000'"
^PHN-DECLINE	Decline (send to voice mail if configured) the incoming call on <CallID> as indicated from
Declines the	the previous PHN-INCOMING message. CallID should be 0 or 1.
incoming call.	Syntax:
	"'^PHN-DECLINE, <CallID>'"
	Variable:
	CallID = The identifying number of the connection.
	Example:
	SEND_COMMAND Panel,"'^PHN-DECLINE,0""
^PHN-DTMF	Syntax:
Sends DTMF	"’^PHN-DTMF, <DTMF code>’"
codes.	Variable:
	DTMF code = 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, POUND, or ASTERISK.
	Example:
	SEND_COMMAND Panel,"'^PHN-DTMF, 1234567879ASTERISK'"

188 NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel with Intercom