Firmware Pages and Descriptions

Wireless Settings Page (Cont.)

RF Link Info (Cont.):

Link Quality

Signal Strength

Data Rate

Displays the quality of the link from the wireless NIC to the Wireless Access Point (direct sequence spread spectrum) in real time (None, Poor, Fair, Good, Very Good, and Excellent).

Even when link quality is at its lowest you still have a connection, and the ability to transmit and receive data, even if at lower speeds.

Note: “Link Quality” and “Signal Strength” are applicable to RF connections only. It is possible to have an RF signal to a WAP, but be unable to communi- cate with it because of either incorrect IP or encryption settings.

This indicator displays a description of the signal strength from the Wireless Access Point connection in real time (None, Poor, Fair, Good, Very Good, and Excellent).

SNR (Signal Noise Ratio) is a measure of the relative strength of a wireless RF connection. Given this value and the link quality above, you can determine the noise level component of the SNR. For example, if signal strength is high but the link quality is low, then the cause of the link degradation is noise. However, if signal strength is low and link quality is low the cause would simply be signal strength.

The data rate (in Mbps) at which the panel is currently communicating with the target WAP.

Note: Data rates for 802.11b communication are: 1, 2, 5.5, and 11 Mbps.

Secondary Connection Page

The Secondary Connection page sets the communication information for an installed wireless interface card. The NXD-CV5 Touch panel is not enabled for wireless communication and therefore, this page is not user- editable.

Wireless Security Page

The options on the Wireless Security page allow you to select from the wireless security methods supported by the NXA-WC80211GCF Wi-Fi card. These security methods incorporate WPA, WPA2, and EAP technology (some of which require the upload of unique certificate files to a target panel).

Refer to the Appendix B - Wireless Technology section on page 197 for more further information.

Some encryption and security features may/may not be supported depending on the type of wireless card being used:

Wireless Security Support

802.11g Wi-Fi CF card:

Open (Clear Text)

Static WEP (64-bit and 128-bit key lengths)

WPA-PSK

EAP security (with and without certificates)

WAP SIte Survey

Refer to the Configuring a Wireless Network Access section on page 43 for more information on configuring the panel for wireless network access using the various security options.

NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel with Intercom

91

 

 

Page 105
Image 105
AMX NXD-700Vi manual Secondary Connection, Wireless Security Support, 802.11g Wi-Fi CF card

NXD-700Vi specifications

The AMX NXD-700Vi is a cutting-edge touchscreen control panel designed to enhance the user experience in various AV environments, including conference rooms, classrooms, and home theaters. Featuring a sleek and modern design, the NXD-700Vi combines advanced technology with an intuitive interface, making it an ideal solution for both commercial and residential applications.

At the heart of the NXD-700Vi is a 7-inch high-resolution LCD touchscreen, which delivers vibrant colors and crisp details, ensuring that users can easily navigate through the various functionalities and options available. The screen is equipped with an anti-glare coating that allows for optimal visibility in different lighting conditions, making it suitable for any setting.

One of the standout features of the NXD-700Vi is its customizable interface. Users can personalize the layout and graphics, tailoring the control panel to meet specific needs or branding requirements. This flexibility not only enhances usability but also provides a unique touch that can resonate with the intended audience.

The NXD-700Vi employs advanced networking capabilities, allowing for seamless integration with a wide array of AV devices and systems. It supports Ethernet connectivity, enabling users to control various devices from anywhere within the network. This flexibility is particularly useful in large installations where managing multiple systems can be cumbersome.

In addition to its networking capabilities, the NXD-700Vi incorporates infrared (IR) control, enabling it to communicate directly with many AV components. This dual-functionality ensures that users can manage their complete AV setup, including projectors, audio systems, and lighting, all from a single interface.

Another notable characteristic of the NXD-700Vi is its robust security features. The panel can be configured to restrict access to certain functions or settings, ensuring that sensitive content or equipment is protected from unauthorized use. This is particularly critical in environments where information security is paramount.

The unit is also designed for easy installation and management. With a built-in web server, users can configure the NXD-700Vi remotely, streamlining setup and maintenance. This feature reduces the need for on-site visits, saving both time and resources.

Overall, the AMX NXD-700Vi stands out as a sophisticated, versatile solution for modern AV control needs. With its intuitive touchscreen, customizable interface, and comprehensive integration capabilities, it is an essential tool for enhancing control and interaction in both commercial and residential environments.