NXA-AVB/ETHERNET Breakout Box

Wiring the NXA-AVB/ETHERNET Connectors And Cables

The inputs and outputs on the breakout box are separated into front and rear connectors. The rear connectors are used to input external signals. The front connectors are used to communicate signals between the NXA- AVB/ETHERNET and a target Modero panel. FIG. 8 provides a layout of the wiring connection both into and from the breakout box.

 

 

 

 

Audio In - Left Channel

 

 

GND

 

 

 

 

 

 

In (-)

 

 

 

 

(6-pin

captive wire)

 

In (+)

 

 

 

 

Audio In - Right Channel

 

 

 

GND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In (-)

 

 

 

 

(6-pin

captive wire)

 

 

 

In (+)

 

 

 

 

Microphone Out

 

 

 

 

GND(-)

 

 

 

 

 

 

Out (-)

 

 

 

 

(4-pin captive wire)

 

 

 

 

Out (+)

 

 

 

 

 

 

Comp/Y (BNC)

 

 

 

 

 

 

 

 

C (BNC)

 

 

 

 

 

 

 

 

Ethernet

 

 

 

 

 

 

 

 

(RJ-45)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12 VDC power

 

 

 

 

 

 

 

 

 

 

 

 

supply

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

R

O

N

T

NXA-AVB/ETHERNET

Breakout Box

R

E

A

R

Audio/Video

(CAT5)

Ethernet Out (CAT5)

Power to touch panel

FIG. 8 NXA-AVB/ETHERNET Breakout Box connector wiring diagram

The rear-panel wiring connections are described below (from left to right):

•AUDIO IN: 6-pin mini-Phoenix connector, divided into left and right audio channels. Each channel is divided into GND, IN+, and IN- terminal cable connectors

(2 sets of 3 for each channel).

An example of this cable is to strip the ends of 2 RCA audio cables and insert them into their respective locations on the Audio In port.

Either a balanced (+, -, and GND) or unbalanced (+ and GND) audio signal can be connected to this input.

•MIC OUT: 4-pin mini-Phoenix connector, divided into GND, OUT-, and OUT+ terminal connectors.

An example of this cable is to strip the terminal ends of a 3.5mm mini-jack and insert them into their respective locations on the Mic Out port. This signal can be fed as a Line Level In to either an amplifier or an AMX VOL card.

Either a balanced (+, -, and GND) or unbalanced (+ and GND) audio signal can be connected to this output.

•Video In BNCs: Feeds either Composite/S-Video Luma or S-Video Chroma signals into the NXA-AVB/ETHERNET. This feed is then redirected out to a Modero panel through the front Audio/Video CAT5 port.

•ETHERNET: RJ-45 connector routes data to the G4 touch panel through the front Ethernet port. These connections use a standard CAT5 Ethernet cable to provide communication between the target touch panel, breakout box, and NetLinx Master.

•PWR: 2-pin mini-Phoenix connector that connects to a 12 VDC-compliant power supply. This port can be used to provide power to a Modero panel by sending it through the NXA-AVB/ETHERNET (rear power connector through to the front power connector).

NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel with Intercom

11

 

 

Page 24 Page 26
Page 25
Image 25
AMX NXD-700Vi manual Wiring the NXA-AVB/ETHERNET Connectors And Cables, Audio In Right Channel
Page 24 Page 26

NXD-700Vi specifications

The AMX NXD-700Vi is a cutting-edge touchscreen control panel designed to enhance the user experience in various AV environments, including conference rooms, classrooms, and home theaters. Featuring a sleek and modern design, the NXD-700Vi combines advanced technology with an intuitive interface, making it an ideal solution for both commercial and residential applications.

At the heart of the NXD-700Vi is a 7-inch high-resolution LCD touchscreen, which delivers vibrant colors and crisp details, ensuring that users can easily navigate through the various functionalities and options available. The screen is equipped with an anti-glare coating that allows for optimal visibility in different lighting conditions, making it suitable for any setting.

One of the standout features of the NXD-700Vi is its customizable interface. Users can personalize the layout and graphics, tailoring the control panel to meet specific needs or branding requirements. This flexibility not only enhances usability but also provides a unique touch that can resonate with the intended audience.

The NXD-700Vi employs advanced networking capabilities, allowing for seamless integration with a wide array of AV devices and systems. It supports Ethernet connectivity, enabling users to control various devices from anywhere within the network. This flexibility is particularly useful in large installations where managing multiple systems can be cumbersome.

In addition to its networking capabilities, the NXD-700Vi incorporates infrared (IR) control, enabling it to communicate directly with many AV components. This dual-functionality ensures that users can manage their complete AV setup, including projectors, audio systems, and lighting, all from a single interface.

Another notable characteristic of the NXD-700Vi is its robust security features. The panel can be configured to restrict access to certain functions or settings, ensuring that sensitive content or equipment is protected from unauthorized use. This is particularly critical in environments where information security is paramount.

The unit is also designed for easy installation and management. With a built-in web server, users can configure the NXD-700Vi remotely, streamlining setup and maintenance. This feature reduces the need for on-site visits, saving both time and resources.

Overall, the AMX NXD-700Vi stands out as a sophisticated, versatile solution for modern AV control needs. With its intuitive touchscreen, customizable interface, and comprehensive integration capabilities, it is an essential tool for enhancing control and interaction in both commercial and residential environments.
Top Page Image Contents