Installation

5.Disconnect the terminal end of the power cable from the connected power supply.

Don’t disconnect the connectors from the touch panel. The unit must be installed with the attached connectors before being inserted into the conduit box.

6.Carefully slide the main NXD-700Vi unit (B in FIG. 12) into the conduit box, so that all Mounting Tabs lie flush against the conduit box (C in FIG. 12).

7.Insert and secure four #4-40 Mounting Screws (included) into their corresponding holes located along the sides of the NXD.

8.Place the Faceplate/Trim Ring assembly (A in FIG. 12) back onto the main NXD unit

(B in FIG. 12). Make sure to align the Microphone, Light, and PIR Motion sensor locations to their respective openings on the front faceplate/bezel.

9.Reconnect the terminal RJ-45, Ethernet, USB, and any optional audio/video wiring to their respective locations (outside the conduit box) on either the NXA-AVB/ETHERNET Breakout Box, Ethernet port, or NetLinx Master.

10.Reconnect the terminal power connector on the 12 VDC-compliant power supply and apply power.

Installing the NXD into drywall using Expansion Clips

Expansion clips are mounted through the three oval holes located along the rim of the NXD-700Vi. As the screw is tightened, the clip bends toward the insertion hole and into the wall. This bending creates a "grip" on the wall by either pressing onto the wall or by securing the drywall between the housing and the drywall clip.

The most important thing to remember when mounting the NXD is that the outer frame (Mounting Tabs) must be installed flush against the mounting surface.

Refer to SP-2258-01for detailed installation dimensions (reproduced in FIG. 13).

It is recommended that you cutout the surface slightly smaller than what is outlined in the installation drawings so that you can make any necessary cutout adjustments.

1.Prepare the area by removing any screws or nails from the drywall before beginning the cutout process.

2.Cut out the surface for the NXD Wall Mount unit using the dimensions shown in FIG. 13. Be sure to cut out the three notches along the sides to accommodate the three corresponding drywall expansion clips (included).

30

NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel with Intercom

Page 43 Page 45
Page 44
Image 44
AMX NXD-700Vi manual Installing the NXD into drywall using Expansion Clips
Page 43 Page 45

NXD-700Vi specifications

The AMX NXD-700Vi is a cutting-edge touchscreen control panel designed to enhance the user experience in various AV environments, including conference rooms, classrooms, and home theaters. Featuring a sleek and modern design, the NXD-700Vi combines advanced technology with an intuitive interface, making it an ideal solution for both commercial and residential applications.

At the heart of the NXD-700Vi is a 7-inch high-resolution LCD touchscreen, which delivers vibrant colors and crisp details, ensuring that users can easily navigate through the various functionalities and options available. The screen is equipped with an anti-glare coating that allows for optimal visibility in different lighting conditions, making it suitable for any setting.

One of the standout features of the NXD-700Vi is its customizable interface. Users can personalize the layout and graphics, tailoring the control panel to meet specific needs or branding requirements. This flexibility not only enhances usability but also provides a unique touch that can resonate with the intended audience.

The NXD-700Vi employs advanced networking capabilities, allowing for seamless integration with a wide array of AV devices and systems. It supports Ethernet connectivity, enabling users to control various devices from anywhere within the network. This flexibility is particularly useful in large installations where managing multiple systems can be cumbersome.

In addition to its networking capabilities, the NXD-700Vi incorporates infrared (IR) control, enabling it to communicate directly with many AV components. This dual-functionality ensures that users can manage their complete AV setup, including projectors, audio systems, and lighting, all from a single interface.

Another notable characteristic of the NXD-700Vi is its robust security features. The panel can be configured to restrict access to certain functions or settings, ensuring that sensitive content or equipment is protected from unauthorized use. This is particularly critical in environments where information security is paramount.

The unit is also designed for easy installation and management. With a built-in web server, users can configure the NXD-700Vi remotely, streamlining setup and maintenance. This feature reduces the need for on-site visits, saving both time and resources.

Overall, the AMX NXD-700Vi stands out as a sophisticated, versatile solution for modern AV control needs. With its intuitive touchscreen, customizable interface, and comprehensive integration capabilities, it is an essential tool for enhancing control and interaction in both commercial and residential environments.
Top Page Image Contents