Installation

Flat installation surface

Install the four #4-40 Mounting Screws (included) into these four holes

Mounting Tab

Attachment is done along the edges of the cutout

 

B - Main NXD-700Vi unit

FIG. 16 Wall Mount panel installation configuration for flat surfaces

7.

Disconnect the terminal end of the power cable from the power supply.

Don’t disconnect the connectors from the touch panel. The unit must be installed with the necessary connectors before being inserted into the solid surface.

8.Carefully slide the main unit into the cutout until the Mounting Tabs of the NXD-700Vi unit lie flush against the wall.

9.Insert and secure four #4-40 Mounting Screws (included) into their corresponding holes located along the sides of the NXD-700Vi (using a grounded Phillips-head screwdriver) until the unit is secure and flush against the wall (FIG. 16).

10.Place the Faceplate/Trim Ring assembly (A in FIG. 16) back onto the main unit (B in FIG. 16). Make sure to align the Microphone, Light, and PIR Motion sensor locations to their respective openings on the front bezel/faceplate.

11.Reconnect the terminal RJ-45, Ethernet, USB, and any optional audio/video wiring to their respective locations on either the NXA-AVB/ETHERNET Breakout Box, Ethernet port, or NetLinx Master.

12.Reconnect the terminal power connector on the 12 VDC-compliant power supply and apply power.

Installing an NXD-700Vi into an (optional) Rack Mount Kit (NXA-RK7)

The NXA-RK7 is a 19" (48.3 cm) wide metal rack-mount (with black matte finish) measuring 4 rack units high.

1.Remove the Faceplate/Trim Ring assembly from the main NXD-700Vi unit.

2.Thread the incoming power, RJ-45 audio/video, Ethernet, and USB wiring (from their terminal sources) through the surface opening, leaving enough slack in the wiring to accommodate any re-positioning of the panel.

3.Connect all data and power wiring connectors to their corresponding locations along the left side of the (un-powered) NXD touch panel.

Verify that the terminal end of the power cable is not connected to the a power supply before plugging in the 2-pin power connector.

The USB connectors can be from a either a USB extension cable, or a wireless USB RF transmitter.

34

NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel with Intercom

Page 47 Page 49
Page 48
Image 48
AMX NXD-700Vi manual Flat installation surface
Page 47 Page 49

NXD-700Vi specifications

The AMX NXD-700Vi is a cutting-edge touchscreen control panel designed to enhance the user experience in various AV environments, including conference rooms, classrooms, and home theaters. Featuring a sleek and modern design, the NXD-700Vi combines advanced technology with an intuitive interface, making it an ideal solution for both commercial and residential applications.

At the heart of the NXD-700Vi is a 7-inch high-resolution LCD touchscreen, which delivers vibrant colors and crisp details, ensuring that users can easily navigate through the various functionalities and options available. The screen is equipped with an anti-glare coating that allows for optimal visibility in different lighting conditions, making it suitable for any setting.

One of the standout features of the NXD-700Vi is its customizable interface. Users can personalize the layout and graphics, tailoring the control panel to meet specific needs or branding requirements. This flexibility not only enhances usability but also provides a unique touch that can resonate with the intended audience.

The NXD-700Vi employs advanced networking capabilities, allowing for seamless integration with a wide array of AV devices and systems. It supports Ethernet connectivity, enabling users to control various devices from anywhere within the network. This flexibility is particularly useful in large installations where managing multiple systems can be cumbersome.

In addition to its networking capabilities, the NXD-700Vi incorporates infrared (IR) control, enabling it to communicate directly with many AV components. This dual-functionality ensures that users can manage their complete AV setup, including projectors, audio systems, and lighting, all from a single interface.

Another notable characteristic of the NXD-700Vi is its robust security features. The panel can be configured to restrict access to certain functions or settings, ensuring that sensitive content or equipment is protected from unauthorized use. This is particularly critical in environments where information security is paramount.

The unit is also designed for easy installation and management. With a built-in web server, users can configure the NXD-700Vi remotely, streamlining setup and maintenance. This feature reduces the need for on-site visits, saving both time and resources.

Overall, the AMX NXD-700Vi stands out as a sophisticated, versatile solution for modern AV control needs. With its intuitive touchscreen, customizable interface, and comprehensive integration capabilities, it is an essential tool for enhancing control and interaction in both commercial and residential environments.
Top Page Image Contents