Anritsu S114C, S113C, S332C, S331C manual Chapter Getting Started, Power On Procedure

Chapter 3

Getting Started

Introduction

This chapter provides a brief overview of the Anritsu Site Master. The intent of this chapter is to provide the user with a starting point for making basic measurements.

Power On Procedure

The Anritsu Site Master is capable of up to 2.5 hours of continuous operation from a fully charged, field-replaceable battery. Built-in energy conservation features allow battery life to be extended over an eight-hour workday.

The Site Master can also be operated from a 12.5 Vdc source (which will also simulta- neously charge the battery). This can be achieved with either the Anritsu AC-DC Adapter (P/N 40-115) or 12.5 Vdc Automotive Cigarette Lighter Adapter (P/N 806-62). Both items are included as standard accessories (see Chapter 1).

To power on the Site Master:	3
Step 1. Press the ON/OFF front panel key (Figure 3-1).

Site Master S332C

1

2

ESCAPE

CLEAR

MODE

START AUTO

CAL SCALE

3 4

SAVE RECALL

SETUP SETUP

5 6

LIMIT MARKER

7 8

SAVE RECALL

DISPLAY DISPLAY

9 0

ON PRINT

OFF.

FREQ/DIST AMPLITUDE SWEEP

ENTER

RUN

HOLD +/-

SYS

ON/OFF KEY

Figure 3-1. Site Master On/Off Key

The Site Master takes about five seconds to perform a series of self-diagnostic and adjustment routines. At completion, the screen displays the Anritsu logo, the model number, and the firmware version. The Site Master will continue after a

10 second timeout, or:

Step 2. Press ENTER to continue.

The Site Master is now ready for operation.

3-1