Chapter 2 Functions and Operations
ON/OFF — Turns the selected marker on or off.
EDIT — Opens the selected marker parameter for data entry. Press ENTER when data entry is complete or ESCAPE to restore the previous value.
PEAK BETWEEN M3 & M4 — Places the selected marker at the peak be- tween marker M3 and marker M4.
VALLEY BETWEEN M3 & M4 — Places the selected marker at the valley between marker M3 and marker M4.
BACK — Returns to the Main Markers Menu.
LIMIT | Pressing LIMIT on the data keypad activates a menu of limit related functions. |
| Use the corresponding softkey to select the desired limit function. Then use the |
| Up/Down arrow key to change its value, which is displayed in the message area |
| at the bottom of the display. |
| Choosing LIMIT in FREQ or DTF measurement modes causes the soft keys be- |
| low to be displayed. |
| SINGLE LIMIT — Sets a single limit value in dBm. Menu choices are: |
| ON/OFF |
| EDIT |
| BACK |
| MULTIPLE LIMITS — Sets multiple user defined limits, and can be used to |
| create a limit mask for quick pass/fail measurements. Menu choices are: |
| SEGMENT 1 |
| SEGMENT 2 |
| SEGMENT 3 |
| SEGMENT 4 |
| SEGMENT 5 |
| BACK |
| LIMIT BEEP — Turns the audible limit beep indicator on or off. |
| Choosing LIMIT in SPECTRUM ANALYZER measurement mode causes the soft |
| keys below to be displayed. |
| SINGLE LIMIT — Sets a single limit value in dBm. Menu choices are: |
| ON/OFF |
| EDIT |
| BACK |
| MULTIPLE UPPER LIMITS — Sets multiple user defined upper limits, and |
| can be used to create an upper limit mask for quick pass/fail measurements. |
| Menu choices are: |
| SEGMENT 1 |
| SEGMENT 2 |
| SEGMENT 3 |
| SEGMENT 4 |
| SEGMENT 5 |
| BACK |
| MULTIPLE LOWER LIMITS — Set multiple user defined lower limits, and |
| can be used to create a lower limit mask for quick pass/fail measurements. |
| Menu choices are: |
