Overview

General

The InRoom product family is an assemble to order (ATO) line of perimeter air conditioning systems that provide precision cooling for data centers and server rooms.

Precision environmental close control requirements now reach far beyond the confines of the traditional data center or computer room to encompass a larger suite of applications, referred to as technology rooms. Critical environment applications include:

Computer rooms

Telecommunication facilities

Clean rooms

Power equipment

Medical equipment rooms

Archives

LAN/WAN environments

A worldwide network of APC representatives is fully qualified to provide engineering, sales, installation and service for our products.

APC warrants all parts for 1 year.

Models

The InRoom precision air conditioning unit is available in five sizes. The system is available in both chilled water and direct expansion for a combination of six heat rejection methods.

Select from ACPDX21-86 and ACPCW40-150.

Room Air Distribution

The InRoom downflow system draws warm exhaust air in through the top of the unit and cools it. The cool air is distributed back into the room through a raised floor plenum. These systems are ideal for areas with raised floors greater than 305 mm (10 in) high. Upflow systems draw warm exhaust air in through the front of the unit. The warm exhaust air is then cooled and discharged back into the room through a plenum or ductwork. Upflow systems are ideal for areas without a raised floor, but can also be used in a raised floor environment.

The InRoom precision air conditioner delivers high volume airflow to help eliminate hot spots in densely populated environments.

Configurations

Air Cooled

Air Cooled with Chilled Water Coil (MultiCool)

Chilled Water Coil

Fluid Cooled (Glycol)

Fluid Cooled (Glycol) with Economizer Cooling Coil

Fluid Cooled (Glycol) with Chilled Water Coil

Compliance Approval

1.ETL/CETL

2.NTRL Listed

3.Electrical Systems comply with NEC and UL 1995/ CSA22.2 No.236

Standard Features

1.Insulated Cabinet

2.Direct Drive Fans

3.Electrical Panel

4.Main Power Disconnect Switch

5.Refrigeration System with Scroll Compressor and Crankcase Heater (DX only)

6.Redundant Group Control

7.Network Management Card

8.Electronic Expansion Valve (DX only)

9.Duct Flange (Upflow only)

10.30% ASHRAE Air Filters

11.Brazed plate condenser

12.2 or 3 Way Fluid Regulating Valves (Glycol models)

13.2 or 3 Way Fluid Regulating Valves (CW only)

14.Discrete Input/Output Interface

15.Resettable Circuit Breakers

16.Microprocessor Controller

17.Graphical User Interface

18.Electrically Commutated (EC) Fans

19.Stainless Steel Condensate Pan

20.Automatic Transfer Switches

Optional Features

1.

Plenum

2.

Sub-base Plenum

3.

Floorstand

4.

Seismic Floorstand

5.

Immersed Electrode

 

Humidifier

6.

Condensate Pump

7.

Electric Heat

8.

Spot Water Detector(s)

9.

Cable Water Detector(s)

CUS

(60 Hz only)

10. Smoke Detector

11. Hot Gas Bypass Valve

InRoom Precision AC Tech Data Manual

1

Page 5
Image 5
APC ACPCW40-150, ACPDX21-86 manual General, Models, Room Air Distribution, Configurations, Compliance Approval

ACPCW40-150, ACPDX21-86 specifications

The APC ACPCW40-150 and APCDX21-86 are two innovative products from APC (American Power Conversion), known for their commitment to providing reliable power solutions for various applications. These models are tailored to meet the demands of modern businesses by focusing on efficiency, safety, and advanced technology.

The APC ACPCW40-150 is a 1500 VA line-interactive UPS (Uninterruptible Power Supply) system designed for protecting sensitive electronic equipment. This model features Automatic Voltage Regulation (AVR) which ensures consistent output voltage by correcting minor voltage fluctuations without switching to battery power. This capability extends battery life and enhances overall system reliability. The ACPCW40-150 is equipped with a user-friendly LCD interface providing real-time information on battery status, load capacity, and various operational parameters, making monitoring straightforward.

The ACPCW40-150 utilizes sine wave output to ensure compatibility with a broad range of devices, from servers to networking equipment. Its compact design makes it suitable for limited spaces, while multiple outlets allow for easy connection of various devices. The intelligent battery management system further optimizes charging cycles and enhances battery longevity, essential for organizations aiming to minimize downtime and maintenance costs.

On the other hand, the APCDX21-86 is a high-performance surge protector designed to safeguard electronic devices from power surges and spikes. This model boasts advanced surge protection technologies, ensuring that connected equipment remains safe even from the most sudden electrical disturbances. The APCDX21-86 includes multiple outlets, designed to support various devices ranging from consumer electronics to professional equipment, making it a versatile solution for both home and office environments.

One of the standout features of the APCDX21-86 is its EMI/RFI filtering, which prevents electromagnetic interference that can disrupt the functionality of sensitive electronics. The device is also equipped with diagnostic LEDs that provide immediate feedback on the protection status, allowing users to identify any issues promptly. Furthermore, its robust construction ensures that it can withstand typical wear and tear, making it a reliable choice for long-term use.

In summary, both the APC ACPCW40-150 and APCDX21-86 represent the forefront of power protection technology. Their main features not only cater to the need for uninterrupted power supply and equipment safeguarding but also integrate user-friendly technologies that promote efficiency and ease of use. Businesses and individuals alike can rely on these devices to enhance their operational resilience against power-related issues.