APC SYCFXR9 manual How to replace a battery module, How to replace a power distribution module

Maintenance: Parts Replacement

How to replace a battery module

Use two people to lift components weighing between 18–32 kg/40–70 lb.

Holding the handle, gently lift the battery unit and pull it halfway out. A lock mechanism prevents it from being pulled all the way out.

Release the lock by pushing the battery unit upwards and pull the battery unit all the way out while supporting it

Take the replacement battery unit and push it into the system.

Note: Allow for a 24-hour recharging period of the batteries after system start-up/battery replacement for battery monitoring data to become fully reliable.

How to replace a power distribution module

Disconnect the power cable from the power distribution module from the extension cable.

Open the locking latch on the module and gently pull it out of the enclosure.

Reverse the procedure to install the new module.

990-3015-001 Symmetra PX 160 kW 400 V Operation 19