Additional Procedures | Battery Verification - 2 | |
1 | Disconnect the battery |
|
| connector. | |
2 | Set the voltmeter to the | |
| 10 volts DC scale. | |
3 | Hold the positive probe | |
| of the voltmeter to the | |
| positive end of the | |
| battery connector and | |
| the negative probe to the | |
| negative end of the | |
| battery connector. | |
4 | If the battery voltage is | |
| below 3.0 volts, replace | |
| the battery. Refer to | |
| “Battery Replacement” | |
| in this chapter. | |
