Port Security, Allowed Address | Asante Technologies 1016-IQ

Menus

Security

This menu is not a management option; it is a title for the sub-menus listed below it. This menu cannot be selected.

Port Security

This menu allows you to control access to the device’s ports by specify- ing the physical addresses that are allowed to connect to the ports.

If an unauthorized physical address attempts to connect to a restricted port, an action (such as partition the port, send a trap, etc) can occur.

Table 5-15 describes each ﬁeld in the Port Security menu.

ΔNote: For instructions on using this menu, see “Setting Port Security” on page 4-23.

	Table 5-15 Port Security Menu

Field	Description

Group	Read-only ﬁeld; displays the number of the group.

Port	Read-only ﬁeld; displays the number of the port on the
	group.

Status	Conﬁgurable ﬁeld; determines the status of the entry.
	❏ valid — entry is active.
	❏ invalid — entry is inactive (deletes the entry).

Allowed Address	Conﬁgurable ﬁeld; displays the physical address that is
	allowed to connect to the speciﬁed port.

Page 5-22

Image 68

Asante Technologies 1016-IQ user manual Port Security, Allowed Address

Contents

IntraSpection Personality Module Copyright Notice Table of Contents Index Index-i Chapter Contents About This Manual Document Conventions Audience Introduction AsantéHub 1016-IQ Personality Module Management Options Client System RequirementsServer Installation Installing a Personality Module Installation Installing a Personality Module Accessing the Device Accessing the Device Accessing the Device Image Device Page ComponentsDevice Information Front Panel Image Front-panel image components Selecting the Device for Management Selecting an Item Menu Components TablesTable Columns Buttons Management Performing Basic Management FunctionsConﬁguration Tasks Management Tasks Management Setting Community Strings IntraSpection navigation bar IntraSpection Map Manager Conﬁguring Network Access Parameters Network Information Table Conﬁguring Device Identiﬁcation Information Click Identify Updating the Device Click Validate Viewing General Device Information Device Information Table Performing a Software Upgrade Click SWUpgrade Enabling/Disabling Ports Enabling/Disabling Ports Partitioning a Port Click Partition Resetting the AsantéHub 1016-IQ 10 Device Reset Table Management Enabling Authentication Traps 12 Agent Information TablePage Deleting a Trap Receiver Entry Setting Alarms Click Threshold Setting Alarms Deleting an Alarm Viewing Node Summary Information Click Node Summary Management Setting Port Security Click Port Security Management Viewing Statistics Table Statistics Management Graph Statistics Management Menus Reset Menu Description ControlPartition Threshold Identify Device Modules Ports PortPort Type Link Status Admin State Field Description Jabber StatusJabber State Polarity Status Agent Network SWUpgrade Field Description Remote Boot Protocol Reset Field Description Reset Agent Partition Field Description Group NumberPort Number Action Threshold Field Description IndexStatus Target Domain Sample Type Field Description TPort target portTarget Subject Field Description Startup Event Threshold ValueDetected Value Rising Event Deﬁned the entry eight-byte octect Node Summary Field Description Sampling Interval Objects Field Description Collisions Graph Port Security Allowed Address Port Security Field Description Violation Action Trap Receivers Field Description StatusTrap Receiver Community String Technical Support Technical Support Hours Index Numerics See also device Index-iii Odbc Index-v Index-vi