0.0.0.0.
5 Type the community string for the management station in the Community String field.
Page 4-16
Do NOT type an IP address of
▲ Important:
The Add Dialog box appears.
3 Open the Status drop-down menu and select valid.
4 Type the IP address of the management station that is to receive traps in the Trap Receiver Address field.
Click Add.
2
Δ Note: For a description of each field, see “Trap Receivers” on page 5-24.
Figure 4-13
Trap Receiver Table
Click TrapReceivers.
The Trap Receiver Table appears, similar to Figure 4-13.
1
Management
Managing Trap Receivers
The Trap Receivers menu allows you to determine which management stations on your network can receive traps from the AsantéHub 1016- IQ.
This section describes how to add and delete a trap receiver’s entry. To add a trap receiver entry:
