Asoka™ PlugLink™ Wall Mount Users Manual

Important Safety Information

This product is intended for connection to the AC power line. The following precautions should be taken when using this product:

Read all instructions before installing and operating this product.

Follow all warnings and instructions marked on the product.

Do not operate this product near water.

This product relies on a building’s electrical installation for short-circuit (over current) protection. Ensure that a fuse or circuit breaker no larger than 15 Amp is used on the phase conductors (all current-carrying conductors).

Do not allow anything to rest on the product interconnect cords.

Do not locate this product where people may walk on the cords.

The wall mount should be plugged directly into a AC wall outlet. (Note: The appropriate voltage, 120/240V, will be clearly marked on the box.)

Only a qualified technician should service this product. Opening or removing covers may result in exposure to dangerous voltage points or other risks. (Note: Opening or remov- ing the covers will void your product warranty.)

Unplug the wall mount from the wall outlet and refer the product to qualified service per- sonnel for the following conditions:

-When the interconnect cords are damaged or frayed.

-If liquid has been spilled onto the product.

-If the product has been exposed to rain or water.

-If the product does not operate normally when the operating instructions have been followed.

-If the product exhibits a distinct change in performance.

3

Page 4
Image 4
Asoka PlugLink user manual Important Safety Information