2.3 CPU Installation

 

 

 

 

 

 

 

 

 

 

 

 

For the installation of Intel 1155-Pin CPU,

 

 

 

 

 

 

 

 

 

 

 

 

please follow the steps below.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Load Plate

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Load Lever

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Socket Body

 

 

 

 

 

Contact Array

 

 

 

1155-Pin Socket Overview

Before you insert the 1155-Pin CPU into the socket, please check if the CPU surface is unclean or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.

Step 1. Open the socket:

Step 1-1. Disengage the lever by pressing it down and sliding it out of the hook.

Step 1-2. Keep the lever positioned at about 135 degrees in order to flip up the load plate.

Step 2. Remove the PnP Cap (Pick and Place Cap).

1.It is recommended to use the cap tab to handle and avoid kicking off the PnP cap.

2.This cap must be placed if returning the motherboard for after service.

English

13

ASRock B75M-GL R2.0 Motherboard