ATX 12V Power Connector

Please connect an ATX 12V

(4-pin ATX12V1)

power supply to this connector.

(see p.2, No. 2)

 

 

 

Serial port Header

This COM1 header supports a

(9-pin COM1)

serial port module.

(see p.2, No. 23)

 

Chassis Intrusion Header

(2-pin CI1)

1

 

 

 

 

 

 

(see p.2, No. 25)

 

 

GND

Signal

 

This motherboard supports CASE OPEN detection feature that detects if the chassis cover has been removed. This feature requires a chassis with chassis intrusion detection design.

English

2.12 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from top to bottom to install those required drivers. Therefore, the drivers you install can work properly.

2.13 Installing Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit Without RAID Functions

If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow the procedures below according to the OS you install.

2.13.1 Installing Windows® XP / XP 64-bit Without RAID Functions

If you want to install Windows® XP / XP 64-bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow the steps below.

AHCI mode is not supported under Windows® XP / XP 64-bit.

32

ASRock B75M-GL R2.0 Motherboard

Page 31 Page 33
Page 32
Image 32
ASRock B75M-GL R2.0 manual English Driver Installation Guide, Installing Windows XP / XP 64-bit Without RAID Functions
Page 31 Page 33
Top Page Image Contents