
TWRWR
This option appears only when you adopt AM2 CPU. Use this to adjust TWRWR values. Configuration options: [Auto], [1CLK], [2CLK] and [3CLK]. The default value is [Auto].
TRDRD
This option appears only when you adoptAM2 CPU. Use this to adjust TRWTTD values. Configuration options: [Auto], [2CLK], [3CLK], [4CLK] and [5CLK]. The default value is [Auto].
MA Timing
Use this to adjust values for MA timing. Configuration options: [Auto], [2T], [1T]. The default value is [Auto].
Addr/Cmd Fine Delay
Use this to adjust values forAddr/Cmd FineDelay feature. Configuration options: [Auto], [No Delay], [1/64CLK] to [31/64CLK]. The default value is [Auto].
CS/ODT Fine Delay
Use this to adjust values for CS/ODT Fine Delay feature. Configuration options: [Auto], [No Delay], [1/64CLK] to [31/64CLK]. The default value is [Auto].
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the same node, or accross nodes, decreasing access contention.
3.3.2 | Chipset Configuration |
|
| ||
|
| BIOS SETUP UTILITY |
|
| |
| Advanced |
|
|
| |
Chipset Settings |
| To set DRAM Voltage. | |||
Onboard LAN | [Enabled] |
|
| ||
Onboard HD Audio | [Auto] |
|
| ||
Front Panel | [Auto] |
|
| ||
Hybrid SLI | [Disabled] |
|
| ||
Primary Graphics Adapter | [PCI] |
|
| ||
CPU - NB Link Speed | [Auto] |
|
| ||
CPU - NB Link Width | [Auto] |
|
| ||
DRAM Voltage | [Auto] |
| Select Screen | ||
| Select Item | ||||
Chipset Core Voltage | [Auto] |
| |||
+ - | Change Option | ||||
HT Voltage | [Auto] | ||||
F1 | General Help | ||||
|
|
| |||
|
|
| F9 | Load Defaults | |
|
|
| F10 | Save and Exit | |
|
|
| ESC | Exit | |
| v02.54 (C) Copyright |
Onboard LAN
This allows you to enable or disable the onboard LAN feature.
Onboard HD Audio
Select [Auto], [Enabled] or [Disabled] for the onboard HDAudio feature. If you select [Auto], the onboard HD Audio will be disabled when PCI Sound Card is plugged.
47