Asus M2A690G installation manual C d

14. Ports on the HDMI module

This module contains four ports, allowing you to connect any kind of video/audio source to your system. Connect the HDMI module to the onboard PCI Express x16 slot and the HDMI module cable to the onboard YUV/SPDIF_OUT connector.

• Refer to page 1-29 for the position of the onboard YUV/SPIDF_OUT connector.

•After installing the HDMI module, make sure the audio device of Sound playback is HDMI Audio rear output (the name may be different based on the OS). Go to Start > Control Panel > Sounds and Audio Devices > Sound Playback to configure the setting.

a b c d

a.HDMI port. This port is for a high-definition multimedia interface

(HDMI) connector.

b.S-Video port / YPbPr port. This 7-pin port connects any kind of video source via a YPbPr cable or an S-Video cable.

YPbPr cable

c.Video port. This port connects any kind of video source via an RCA cable.

d.S/PDIF Out port. This port connects an external audio output device via an coaxial S/PDIF cable.

• The YPbPr cable, RCA cable and the S-Video cable are purchased separately.

•Simultaneous output for YPbPr, AV, S, and RGB is not supported.

ASUS V-Series M2A690G 4-13