Asus M2A690G UMA Frame Buffer Size 64MB, Surroundview Disabled, Spread Spectrum Auto

UMA Frame Buffer Size [64MB]

Configuration options: [32MB] [64MB] [128MB] [256MB]

Surroundview [Disabled]

Allows you to disable or enable the surroundview function. Configuration options: [Disabled] [Enabled]

This item becomes user-configurable when you install an ATI graphics card into the PCI Express x16 slot.

Spread Spectrum [Auto]

Allows you to disable or set to Auto the clock generator spread spectrum.

Configuration options: [Disabled] [Auto]

5.4.4	PCIPnP
	Phoenix-Award BIOS CMOS Setup Utility
	Advanced
	PCIPnP		Select Menu
Plug & Play O/S		[No]	Item Specific Help
Resources Controlled By		[Auto]	Select Yes if you are using
x IRQ Resources			a Plug and Play capable
PCI Latency Timer(CLK)		[64]
			operating system Select
** PCI Express relative items **			No if you need the BIOS to
Maximum Payload Size		[4096]	configure non-boot devices

Plug & Play O/S [No]

When set to [No], the BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. Configuration options: [No] [Yes]

Resources Controlled By [Auto]

When set to [Auto], the BIOS automatically configures all the boot and Plug and Play compatible devices. Set to [Manual] if you want to assign the IRQ DMA and memory base address fields.

Configuration options: [Auto] [Manual]

When the item Resources Controlled By is set to [Auto], the item IRQ Resources is grayed out and not user-configurable. Refer to the section “IRQ Resources” for information on how to enable this item.

5-22 Chapter 5: BIOS setup