III. INSTALLATION

Jumper Settings

1.Real Time Clock (RTC) RAM (RTCLR)

The CMOS RAM is powered by the onboard button cell battery. To clear the RTC data: (1) Turn off your computer and remove the AC power , (2) Move this jumper to “Clear Data,” (3) Move the jumper back to “Operation,” (4) Turn on your computer, (5) Hold down <Delete> during bootup and enter BIOS setup to re-enter user preferences.

Battery Test Jumper (RTCLR)

You can test the battery’s current by removing this jumper and attaching a cur- rent meter to pins 1&2. WARNING: You must unplug the power cord to your power supply to ensure that there is no power to your motherboard. The CMOS RAM containing BIOS setup information may be cleared by this action. You should enter BIOS to “Load Setup Defaults” and re-enter any user information after removing and reapplying this jumper.

RTC RAM

RTCLR

Operation

[1-2]

(Default)

Clear Data

[2-3]

(momentarily)

 

 

 

 

 

 

 

 

 

 

 

RTCLRRTCLR

Battery Test

Operation (Default) Clear Data

RTC RAM (Operation / Clear Data)

2.Onboard Audio Selection (AUDIO) (with optional onboard Audio)

This jumper allows you to Disable the onboard audio chipset inorder to use your own audio card. Otherwise, leave on default of Enabled.

Onboard Audio

AUDIO

 

Enabled

[2-3]

(Default)

 

Disabled

[1-2]

 

 

 

 

AUDIO

AUDIO

 

 

1

1

 

 

2

2

 

 

3

3

 

 

Disable

Enable

 

 

 

(Default)

Onboard Audio (Disable / Enable)

INSTALLATION

Jumpers

III.

 

 

 

ASUS TX97-XE User’s Manual

15