Win3.x Audio Drivers

Configuration Manager

In DOS and Windows 3.1x environments a program called the Configuration Manager must be installed in order for the Configuration Manager to do resource allocations for all ISA Plug and Play cards. The audio portion of this card uses 16-bit ISA specifications.

Creative PnP Configuration Manager (CTCM)

If you try installing the audio drivers first, the audio install program will not be able to find the PLUGPLAY\DRIVERS\DOS\ESCD.RF database file and give you the following message: “Configuration Manager not found. Please install the Configuration Manager before installing your Audio Software.” “Press a key to continue.” Pressing a key will send you back to the DOS prompt.

Run the Configuration Manager install under DOS prompt by running INSTALL from the \AUDIO\CTCM\ directory.

The first screen shows:The following path will be used for installing Configuration Manager programs.

Proceed using the settings shown

 

Configuration Manager Path

:

C:\CTCM

Microsoft Windows 3.1 Path

:

C:\WINDOWS

System Bootup Drive

:

C:\
Press <ENTER> to continue, <F1> for help, or <F3> to exit.

If you need to change the paths shown, you may push the down arrow key and press <ENTER> when highlighted. If your Windows directory is not detected, you need to change the path shown to your Windows directory. If you wish to change the Windows path some other time, you will have to run INSTALL from your Configuration Manager installation CD again.

Config. Manager

Win3.x Audio Drivers

ASUS Audio User’s Manual

63