III. INSTALLATION
SIMM Memory Installation
1.The SIMM memory modules will only fit in one orientation as shown because of a safety tab on one end of the SIMM sockets, which requires the notched end of the SIMM memory modules.
INSTALLATION .III
Memory System
4 
3 
2 
1 
2.Press the memory module firmly into place starting from a 45 degree angle making sure that all the contacts are aligned with the socket.
3.With your finger tips, rock the memory module into a vertical position so that it clicks into place.
Clip | 72 Pin DRAM in SIMM Socket |
Plastic Safety Tab (This Side Only) | Mounting Hole |
4.The plastic guides should go through the two mounting holes on the sides and the support clips should snap on the other side.
5.To release the memory module, push both support clips outward and rock the module out of the support clips.
20 | ASUS |