IV. BIOS SOFTWARE
PWR Up On Modem Act (Enabled)This field allows either settings of Enabled (default) or Disabled for powering up the computer (turns the ATX power supply on) when the modem begins receiving or transmitting data while the computer is off.
AC PWR Loss Restart (Disabled)This field allows you to set whether you want your system to boot up after the power has been interrupted. Disabled leaves your system off after reapplying power and Enabled boots up your system after replying power.
Automatic Power Up (Disabled)This field allows you to have an unattended or automatic power up of your system. You may configure your system to power up at a certain time of the day by selecting Everyday, which will allow you to set the time or at a certain time and day by selecting By Date.
.....................................................................................................................................
Fan Monitor (xxxxRPM)The onboard hardware monitor can detect the Chassis Fan Speed, CPU Fan Speed, and the Power Supply Fan Speed in Rotations Per Minute (RPM). These values refresh upon any key entries in the BIOS setup screen. Set to Ignore if one of these are not used so that error messages will not be given.
Thermal Monitor (xxxC/xxxF)The onboard hardware monitor can detect the CPU and MB (motherboard) Tempera- tures. These values refresh upon key entries. Set to Ignore only if necessary.
Voltage Monitor (xx.xV)The onboard hardware monitor can detect the voltages put out by the voltage regu- lators. These values refresh upon key entries. Set to Ignore only if necessary.
NOTE: If any of the monitored items are out of range, you will be prompted by this
message: “Hardware Monitor found an error, enter POWER MANAGEMENT SETUP for details”. The bottom of the screen will instruct you to “Press F1 to continue, DEL to enter SETUP”
Power Management
IV. BIOS
ASUS | 49 |