III.INSTALLATION
2.System Memory (SIMM & DIMM)
This motherboard supports four
Dual Inline Memory Modules (DIMMs) can be used when the SIMM sockets are not used. Two sockets are available for 3.3Volt (power level) Unbuffered Synchronous DRAMs (SDRAM) or EDO DRAM of either 8, 16, 32, 64, or 128MB to form a memory size between 8MB to 256MB. One side (with memory chips) of the DIMM module takes up one row on the motherboard.
IMPORTANT: Memory speed setup is required through “Auto Configuration” in BIOS Chipset Setup of the BIOS SOFTWARE. If both 60ns and 70ns memory are used, set “Auto Configuration” to 70ns. Do not use memory modules with more than 24 chips per module. Modules with more than 24 chips exceed the design specifications of the memory subsystem and will be unstable.
Memory Socket | SIMM Memory Module |
| Total Memory |
|
|
|
|
SIMM Sockets 1&2 | 4MB, 8MB, 16MB, 32MB, 64MB | x2 |
|
(Rows 0 & 1) |
|
| |
| (DIMM Sockets must be empty) |
|
|
|
|
|
|
SIMM Sockets 3&4 | 4MB, 8MB, 16MB, 32MB, 64MB | x2 |
|
(Rows 2 & 3) |
|
| |
| (DIMM Sockets must be empty) |
|
|
|
|
|
|
| Total System Memory (Max 256MB) | = |
|
|
|
|
|
WARNING! Do not install both SIMMs and DIMMs at the same time or else you will burn your memory. Mixing SIMMs and DIMMs require 5.0Volt (signal level) tolerant memory chips which are currently unavailable.
Memory Socket | DIMM Memory Module |
| Total Memory |
|
|
|
|
DIMM Socket 1 | 8MB, 16MB, 32MB, 64MB, 128MB | x1 |
|
(Rows 0 & 1) |
|
| |
| (SIMM Sockets must be empty) |
|
|
|
|
|
|
DIMM Socket 2 | 8MB, 16MB, 32MB, 64MB, 128MB | x1 |
|
(Rows 2 & 3) |
|
| |
| (SIMM Sockets must be empty) |
|
|
|
|
|
|
| Total System Memory (Max 256MB) | = |
|
|
|
|
|
III. INSTALLATION
ASUS | 19 |