INSTALLATION .III

Connectors

III.INSTALLATION

13.IrDA / Fast IR-Compliant infrared module connector (5-pin IR)

This connector supports the optional wireless transmitting and receiving infra- red module. This module mounts to a small opening on system cases that sup- port this feature. You must also configure the setting through “UART2 Use Infrared” in Chipset Features Setup to select whether UART2 is directed for use with COM2 or IrDA. Use the five pins as shown on the Back View and connect a ribbon cable from the module to the motherboard according to the pin definitions.

Front View

Back View

+5V

FIRRX

IRRX

GND

IRTX

IRTX +5V

GND NC

IRRX

For the infrared feature to be available,

Infrared Module Connector you must connect an optional Infrared (IrDA) module to the motherboard.

14.ATX Power Supply Connector (20-pin ATXPWR)

This connector connects to a ATX power supply. The plug from the power supply will only insert in one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned.

IMPORTANT: Be sure that the ATX power supply can take at least 10mAmp load on the 5volt standby lead (5VSB). You may experience difficulty in powering on your system without this.

12.0V

 

 

 

 

 

5.0V

 

 

 

 

 

 

 

5VSB

 

 

 

 

 

5.0V

 

 

 

 

 

PW-0K

 

 

 

 

 

 

-5.0V

 

 

 

 

 

GND

 

 

 

 

 

GND

 

 

 

 

 

5.0V

 

 

 

 

 

GND

 

 

 

 

 

GND

 

 

 

 

 

GND

 

 

 

 

 

5.0V

 

 

 

 

 

PS-ON

 

 

 

 

 

GND

 

 

 

 

GND

 

 

3.3V

 

 

 

 

 

-12.0V

 

 

 

 

 

3.3V

 

 

 

 

3.3V

 

 

 

 

ATX Power Connector

30

ASUS TX97-XE User’s Manual