5.4.11WHEA Configuration

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Advanced

 

WHEA Support

[Enabled]

Enable or disable Windows

 

 

 

Hardware Error Architecture.

 

 

 

 

WHEA Support [Enabled]

Allows you to enable or disable the Windows Hardware Error Architecture support. Configuration options: [Disabled] [Enabled]

5.4.12APM

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Advanced

 

Restrore AC Power Loss

[Last State]

Specify what state to go to

 

Power On By PCIE

[Disabled]

when power is re-applied after

 

Power On By RTC

[Disabled]

a power failure (G3 state).

 

 

 

 

Restore AC Power Loss [Last State]

When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss.

Configuration options: [Power Off] [Power On] [Last State]

Power On By PCIE [Disabled]

[Disabled]

Disables the PCIE devices to generate a wake event.

[Enabled]

Enables the PCIE devices to generate a wake event.

Power On By RTC [Disabled]

[Disabled]

Disables RTC to generate a wake event.

[Enabled]

When set to [Eanbled], the items RTC Alarm Date (Days) and

 

Hour/Minute/Second will become user-configurable with set

 

values.

5-34

Chapter 5: BIOS setup