2.5Expansion slot
2.5.1Installing an expansion card to the riser card bracket
The barebone server comes with two riser card brackets. You need to remove the bracket if you want to install PCI Express x8 or x16 expansion cards.
To install a PCI Express x8 or x16 card in PCIE1 slot:
1.Firmly hold the riser card bracket, then pull it up to detach it from the PCI Express x16 slot on the motherboard.
2.Place the riser card bracket on a flat and stable surface, then remove the screw from the slot bay.
PCI Express x16 slot
3.Install a PCI Express x8 or x16 card to the bracket as shown, then secure the card with a screw.
Chapter 2: Hardware setup |