To install the RAID controller driver when installing Red Hat® Enterprise OS:
1.Boot the system from the Red Hat® OS installation CD.
2.At the boot:, type linux dd noprobe=ata1 noprobe=ata2..., then press <Enter>.
The number of ata varies with the hard disk drive number you have when building a RAID set. For example, if you want to build a RAID set with 6 hard disk drives, type command line: linux dd noprobe=ata1 noprobe=ata2 noprobe=ata3 noprobe=ata4 noprobe=ata5 noprobe=ata6.
-To install or upgrade in graphical mode, press the <ENTER> key.
-To install or upgrade in text mode, type: linux text <ENTER>.
-Use the function keys listed below for more information.
3.Select Yes using the <Tab> key when asked if you have the driver disk, then press <Enter>.
Main Menu 
Do you have a driver
4.Insert the Red Hat® Enterprise RAID driver disk to the USB floppy disk drive, select OK, then press <Enter>.
Insert Driver Disk 
Insert your driver disk into /dev/fd0 and press “OK” to continue.
The drivers for the RAID card are installed to the system.
ASUS |