2.Enter a name for the recovery set and press <Enter>.

3.When the RAID Level item is selected, press the up/down arrow keys to select Recovery, and then press <Enter>.

4.When the Disks item is selected, press <Enter> to select the hard disk drives you want to include in the recovery set. The SELECT DISKS screen appears.

 

 

[ SELECT

 

 

Port Drive Model

Serial #

Size

Status

0

ST3300656SS

HWAS0000991753TR

279.3GB

Non-RAID Disk

1

ST3300656SS

37VN00009846RAJ1

279.3GB

Non-RAID Disk

2

ST3300656SS

397600009846UEDY

279.3GB

Non-RAID Disk

3

ST3300656SS

GWC50000991756G6

279.3GB

Non-RAID Disk

[[↑↓]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery

5.Use the up/down arrow keys to select a drive, press <TAB> to select a Master disk, and then press <SPACE> to select a Recovery disk. A small triangle marks the selected drive. Press <Enter> after completing your selection.

6.When the Sync item is selected, use the up/down arrow keys to select a sync option that you want and press <Enter>.

7.When the Create Volume item is selected, press <Enter>. The following warning message appears.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

8.Press <Y> to create the recovery set and return to the main menu, or <N> to go back to the CREATE VOLUME menu.

If a recovery set is created, you cannot add more RAID sets even when you have more non-RAID disks installed in your system.

6-28

Chapter 6: RAID configuration