2.8.4Connecting the Intel® ASRK Module (Optional)
Follow the steps below to connect the ASRK Module to the connector on your motherboard.
1.Locate the ASRK connector on the motherboard.
2.Connect the ASRK module to the connector.
• For detail of Intel® Rapid Storage Technology utility, please refer to Chapter
6 RAID Configuration.
•The upgrade ASRK kit support HDD 1 - HDD 4 (ISAS1) only. ASRK#1 SAS 3G RAID kit (RAID 0/1/10)
ASRK#2 SAS 3G RAID kit (RAID 0/1/10/5)
Changing the module for different RAID settings:
1. Power off the system and disengage the original module.
2.Reboot the system to enter OS.
3.After the system successfully enters the OS, power off again.
4.Put the intended module in place and reboot the system.
5.The system will automatically detect the different RAID settings.
ASUS |